import { op } from "https://deno.land/x/ddc_vim@v4.3.0/deps.ts";
const { cpoptions } = op;
A sequence of single character flags. When a character is present
this indicates Vi-compatible behavior. This is used for things where
not being Vi-compatible is mostly or sometimes preferred.
'cpoptions' stands for "compatible-options".
Commas can be added for readability.
To avoid problems with flags that are added in the future, use the
"+=" and "-=" feature of ":set" add-option-flags.
NOTE: This option is set to the Vi default value when 'compatible' is set and to the Vim default value when 'compatible' is reset.
NOTE: In a Vim9 script, when vim9script is encountered, the value
is saved, 'cpoptions' is set to the Vim default, and the saved value
is restored at the end of the script. Changes to the value of
'cpoptions' will be applied to the saved value, but keep in mind that
removing a flag that is not present when 'cpoptions' is changed has no
effect. In the .vimrc file the value is not restored, thus using
vim9script in the .vimrc file results in using the Vim default.
NOTE: This option is set to the POSIX default value at startup when
the Vi default value would be used and the $VIM_POSIX environment
variable exists posix. This means Vim tries to behave like the
POSIX specification.
contains behavior
a When included, a ":read" command with a file name
argument will set the alternate file name for the
current window.
A When included, a ":write" command with a file name
argument will set the alternate file name for the
current window.
b "\|" in a ":map" command is recognized as the end of
the map command. The '\' is included in the mapping,
the text after the '|' is interpreted as the next
command. Use a CTRL-V instead of a backslash to
include the '|' in the mapping. Applies to all
mapping, abbreviation, menu and autocmd commands.
See also `map_bar`.
B A backslash has no special meaning in mappings,
abbreviations, user commands and the "to" part of the
menu commands. Remove this flag to be able to use a
backslash like a CTRL-V. For example, the command
`":map X \<Esc>"` results in X being mapped to:
'B' included: "\^[" (^[ is a real `<Esc>`)
'B' excluded: `"<Esc>"` (5 characters)
(`'<'` excluded in both cases)
c Searching continues at the end of any match at the
cursor position, but not further than the start of the
next line. When not present searching continues
one character from the cursor position. With 'c'
"abababababab" only gets three matches when repeating
"/abab", without 'c' there are five matches.
C Do not concatenate sourced lines that start with a
backslash. See `line-continuation`.
d Using "./" in the 'tags' option doesn't mean to use
the tags file relative to the current file, but the
tags file in the current directory.
D Can't use CTRL-K to enter a digraph after Normal mode
commands with a character argument, like `r`, `f` and
`t`.
e When executing a register with ":@r", always add a
`<CR>` to the last line, also when the register is not
linewise. If this flag is not present, the register
is not linewise and the last line does not end in a
`<CR>`, then the last line is put on the command-line
and can be edited before hitting `<CR>`.
E It is an error when using "y", "d", "c", `"g~"`, "gu" or
"gU" on an Empty region. The operators only work when
at least one character is to be operated on. Example:
This makes "y0" fail in the first column.
f When included, a ":read" command with a file name
argument will set the file name for the current buffer,
if the current buffer doesn't have a file name yet.
F When included, a ":write" command with a file name
argument will set the file name for the current
buffer, if the current buffer doesn't have a file name
yet. Also see `cpo-P`.
g Goto line 1 when using ":edit" without argument.
H When using "I" on a line with only blanks, insert
before the last blank. Without this flag insert after
the last blank.
i When included, interrupting the reading of a file will
leave it modified.
I When moving the cursor up or down just after inserting
indent for 'autoindent', do not delete the indent.
j When joining lines, only add two spaces after a '.',
not after '!' or '?'. Also see 'joinspaces'.
J A `sentence` has to be followed by two spaces after
the '.', '!' or '?'. A `<Tab>` is not recognized as
white space.
k Disable the recognition of raw key codes in
mappings, abbreviations, and the "to" part of menu
commands. For example, if `<Key>` sends ^[OA (where ^[
is `<Esc>`), the command ":map X ^[OA" results in X
being mapped to:
'k' included: "^[OA" (3 characters)
'k' excluded: `"<Key>"` (one key code)
Also see the `'<'` flag below.
K Don't wait for a key code to complete when it is
halfway a mapping. This breaks mapping `<F1><F1>` when
only part of the second `<F1>` has been read. It
enables cancelling the mapping by typing `<F1><Esc>`.
l Backslash in a [] range in a search pattern is taken
literally, only "\]", "\^", "\-" and "\\" are special.
See `/[]`
'l' included: "/[ \t]" finds `<Space>`, '\' and 't'
'l' excluded: "/[ \t]" finds `<Space>` and `<Tab>`
Also see `cpo-\`.
L When the 'list' option is set, 'wrapmargin',
'textwidth', 'softtabstop' and Virtual Replace mode
(see `gR`) count a `<Tab>` as two characters, instead of
the normal behavior of a `<Tab>`.
m When included, a showmatch will always wait half a
second. When not included, a showmatch will wait half
a second or until a character is typed. `'showmatch'`
M When excluded, "%" matching will take backslashes into
account. Thus in "( \( )" and "\( ( \)" the outer
parenthesis match. When included "%" ignores
backslashes, which is Vi compatible.
n When included, the column used for 'number' and
'relativenumber' will also be used for text of wrapped
lines.
o Line offset to search command is not remembered for
next search.
O Don't complain if a file is being overwritten, even
when it didn't exist when editing it. This is a
protection against a file unexpectedly created by
someone else. Vi didn't complain about this.
p Vi compatible Lisp indenting. When not present, a
slightly better algorithm is used.
P When included, a ":write" command that appends to a
file will set the file name for the current buffer, if
the current buffer doesn't have a file name yet and
the 'F' flag is also included `cpo-F`.
q When joining multiple lines leave the cursor at the
position where it would be when joining two lines.
r Redo ("." command) uses "/" to repeat a search
command, instead of the actually used search string.
R Remove marks from filtered lines. Without this flag
marks are kept like `:keepmarks` was used.
s Set buffer options when entering the buffer for the
first time. This is like it is in Vim version 3.0.
And it is the default. If not present the options are
set when the buffer is created.
S Set buffer options always when entering a buffer
(except 'readonly', 'fileformat', 'filetype' and
'syntax'). This is the (most) Vi compatible setting.
The options are set to the values in the current
buffer. When you change an option and go to another
buffer, the value is copied. Effectively makes the
buffer options global to all buffers.
's' 'S' copy buffer options
no no when buffer created
yes no when buffer first entered (default)
X yes each time when buffer entered (vi comp.)
t Search pattern for the tag command is remembered for
"n" command. Otherwise Vim only puts the pattern in
the history for search pattern, but doesn't change the
last used search pattern.
u Undo is Vi compatible. See `undo-two-ways`.
v Backspaced characters remain visible on the screen in
Insert mode. Without this flag the characters are
erased from the screen right away. With this flag the
screen newly typed text overwrites backspaced
characters.
w When using "cw" on a blank character, only change one
character and not all blanks until the start of the
next word.
W Don't overwrite a readonly file. When omitted, ":w!"
overwrites a readonly file, if possible.
x `<Esc>` on the command-line executes the command-line.
The default in Vim is to abandon the command-line,
because `<Esc>` normally aborts a command. `c_<Esc>`
X When using a count with "R" the replaced text is
deleted only once. Also when repeating "R" with "."
and a count.
y A yank command can be redone with ".". Think twice if
you really want to use this, it may break some
plugins, since most people expect "." to only repeat a
change.
Z When using "w!" while the 'readonly' option is set,
don't reset 'readonly'.
! When redoing a filter command, use the last used
external command, whatever it was. Otherwise the last
used -filter- command is used.
$ When making a change to one line, don't redisplay the
line, but put a '$' at the end of the changed text.
The changed text will be overwritten when you type the
new text. The line is redisplayed if you type any
command that moves the cursor from the insertion
point.
% Vi-compatible matching is done for the "%" command.
Does not recognize "#if", "#endif", etc.
Does not recognize "/*" and "* /".
Parens inside single and double quotes are also
counted, causing a string that contains a paren to
disturb the matching. For example, in a line like
"if (strcmp("foo(", s))" the first paren does not
match the last one. When this flag is not included,
parens inside single and double quotes are treated
specially. When matching a paren outside of quotes,
everything inside quotes is ignored. When matching a
paren inside quotes, it will find the matching one (if
there is one). This works very well for C programs.
This flag is also used for other features, such as
C-indenting.
- When included, a vertical movement command fails when
it would go above the first line or below the last
line. Without it the cursor moves to the first or
last line, unless it already was in that line.
Applies to the commands "-", "k", CTRL-P, "+", "j",
CTRL-N, CTRL-J and ":1234".
+ When included, a ":write file" command will reset the
'modified' flag of the buffer, even though the buffer
itself may still be different from its file.
* Use ":*" in the same way as ":@". When not included,
":*" is an alias for `":'<,'>"`, select the Visual area.
< Disable the recognition of special key codes in `<>`
form in mappings, abbreviations, and the "to" part of
menu commands. For example, the command
`":map X <Tab>"` results in X being mapped to:
`'<'` included: `"<Tab>"` (5 characters)
`'<'` excluded: "^I" (^I is a real `<Tab>`)
Also see the 'k' flag above.
> When appending to a register, put a line break before
the appended text.
; When using `,` or `;` to repeat the last `t` search
and the cursor is right in front of the searched
character, the cursor won't move. When not included,
the cursor would skip over it and jump to the
following occurrence.
POSIX flags. These are not included in the Vi default value, except
when $VIM_POSIX was set on startup. posix
contains behavior
`#` A count before "D", "o" and "O" has no effect.
& When ":preserve" was used keep the swap file when
exiting normally while this buffer is still loaded.
This flag is tested when exiting.
\ Backslash in a [] range in a search pattern is taken
literally, only "\]" is special See `/[]`
'\' included: "/[ \-]" finds `<Space>`, '\' and '-'
'\' excluded: "/[ \-]" finds `<Space>` and '-'
Also see `cpo-l`.
/ When "%" is used as the replacement string in a `:s`
command, use the previous replacement string. `:s%`
{ The `{` and `}` commands also stop at a "{" character
at the start of a line.
. The ":chdir" and ":cd" commands fail if the current
buffer is modified, unless ! is used. Vim doesn't
need this, since it remembers the full path of an
opened file.
| The value of the $LINES and $COLUMNS environment
variables overrule the terminal size values obtained
with system specific functions.
(Vim default: "aABceFs", Vi default: all flags)