import * as denopsStd from "https://deno.land/x/denops_std@v3.10.1/function/vim/mod.ts";
Functions
Run {cmd} and add an error message to |v:errors| if it does NOT produce a beep or visual bell. Also see |assert_fails()|, |assert_nobeep()| and |assert-return|. Can also be used as a |method|: GetCmd()->assert_beeps() | |
When {expected} and {actual} are not equal an error message is added to |v:errors| and 1 is returned. Otherwise zero is returned |assert-return|. There is no automatic conversion, the String "4" is different from the Number 4. And the number 4 is different from the Float 4.0. The value of 'ignorecase' is not used here, case always matters. When {msg} is omitted an error in the form "Expected {expected} but got {actual}" is produced. Example: assert_equal('foo', 'bar') Will result in a string to be added to |v:errors|: test.vim line 12: Expected 'foo' but got 'bar' ~ Can also be used as a |method|, the base is passed as the second argument: mylist->assert_equal([1, 2, 3]) | |
When the files {fname-one} and {fname-two} do not contain exactly the same text an error message is added to |v:errors|. Also see |assert-return|. When {fname-one} or {fname-two} does not exist the error will mention that. Mainly useful with |terminal-diff|. Can also be used as a |method|: GetLog()->assert_equalfile('expected.log') | |
When v:exception does not contain the string {error} an error message is added to |v:errors|. Also see |assert-return|. This can be used to assert that a command throws an exception. Using the error number, followed by a colon, avoids problems with translations: try commandthatfails call assert_false(1, 'command should have failed') catch call assert_exception('E492:') endtry | |
Run {cmd} and add an error message to |v:errors| if it does NOT produce an error or when {error} is not found in the error message. Also see |assert-return|. When {error} is a string it must be found literally in the first reported error. Most often this will be the error code, including the colon, e.g. "E123:". assert_fails('bad cmd', 'E987:') When {error} is a |List| with one or two strings, these are used as patterns. The first pattern is matched against the first reported error: assert_fails('cmd', ['E987:.*expected bool']) The second pattern, if present, is matched against the last reported error. If there is only one error then both patterns must match. This can be used to check that there is only one error. To only match the last error use an empty string for the first error: assert_fails('cmd', ['', 'E987:']) If {msg} is empty then it is not used. Do this to get the default message when passing the {lnum} argument. When {lnum} is present and not negative, and the {error} argument is present and matches, then this is compared with the line number at which the error was reported. That can be the line number in a function or in a script. When {context} is present it is used as a pattern and matched against the context (script name or function name) where {lnum} is located in. Note that beeping is not considered an error, and some failing commands only beep. Use |assert_beeps()| for those. Can also be used as a |method|: GetCmd()->assert_fails('E99:') | |
When {actual} is not false an error message is added to |v:errors|, like with |assert_equal()|. Also see |assert-return|. A value is false when it is zero. When {actual} is not a number the assert fails. When {msg} is omitted an error in the form "Expected False but got {actual}" is produced. Can also be used as a |method|: GetResult()->assert_false() | |
This asserts number and |Float| values. When {actual} is lower than {lower} or higher than {upper} an error message is added to |v:errors|. Also see |assert-return|. When {msg} is omitted an error in the form "Expected range {lower} - {upper}, but got {actual}" is produced. | |
When {pattern} does not match {actual} an error message is added to |v:errors|. Also see |assert-return|. {pattern} is used as with |=~|: The matching is always done like 'magic' was set and 'cpoptions' is empty, no matter what the actual value of 'magic' or 'cpoptions' is. {actual} is used as a string, automatic conversion applies. Use "^" and "$" to match with the start and end of the text. Use both to match the whole text. When {msg} is omitted an error in the form "Pattern {pattern} does not match {actual}" is produced. Example: assert_match('^f.*o$', 'foobar') Will result in a string to be added to |v:errors|: test.vim line 12: Pattern '^f.o$' does not match 'foobar' ~ Can also be used as a |method|: getFile()->assert_match('foo.') | |
Run {cmd} and add an error message to |v:errors| if it produces a beep or visual bell. Also see |assert_beeps()|. Can also be used as a |method|: GetCmd()->assert_nobeep() | |
The opposite of | |
The opposite of | |
Report a test failure directly, using String {msg}. Always returns one. Can also be used as a |method|: GetMessage()->assert_report() | |
VIM REFERENCE MANUAL by Bram Moolenaar
test20.in oldest, only for tiny and small builds
test_something.vim new style tests
This is for testing: If the memory allocation with {id} is
called, then decrement {countdown}, and when it reaches zero
let memory allocation fail {repeat} times. When {repeat} is
smaller than one it fails one time.
Can also be used as a |method|:
GetAllocId()->test_alloc_fail()
Set a flag to enable the effect of 'autochdir' before Vim
startup has finished.
Characters in {string} are queued for processing as if they
were typed by the user. This uses a low level input buffer.
This function works only when with |+unix| or GUI is running.
Can also be used as a |method|:
GetText()->test_feedinput()
Like garbagecollect(), but executed right away. This must
only be called directly to avoid any structure to exist
internally, and |v:testing| must have been set before calling
any function.
Set the flag to call the garbagecollector as if in the main
loop. Only to be used in tests.
Get the value of an internal variable. These values for
{name} are supported:
need_fileinfo
Can also be used as a |method|:
GetName()->test_getvalue()
Drop one or more files in {list} in the window at {row}, {col}.
This function only works when the GUI is running and the
|drag-n-drop| feature is present.
The supported values for {mods} are:
0x4 Shift
0x8 Alt
0x10 Ctrl
The files are added to the argument list and the first file in
{list} is edited in the window. See |drag-n-drop| for more
information.
Inject a mouse button click event. This function only works
when the GUI is running.
The supported values for {button} are:
0 right mouse button
1 middle mouse button
2 left mouse button
3 mouse button release
4 scroll wheel down
5 scroll wheel up
6 scroll wheel left
7 scroll wheel right
{row} and {col} specify the location of the mouse click. The
first row of the Vim window is 1 and the last row is 'lines'.
The maximum value of {col} is 'columns'.
To inject a multiclick event, set {multiclick} to 1.
The supported values for {modifiers} are:
4 shift is pressed
8 alt is pressed
16 ctrl is pressed
After injecting the mouse event you probably should call
|feedkeys()| to have them processed, e.g.:
call feedkeys("y", 'Lx!')
Ignore any error containing {expr}. A normal message is given
instead.
This is only meant to be used in tests, where catching the
error with try/catch cannot be used (because it skips over
following code).
{expr} is used literally, not as a pattern.
When the {expr} is the string "RESET" then the list of ignored
errors is made empty.
Can also be used as a |method|:
GetErrorText()->test_ignore_error()
Return a |Blob| that is null. Only useful for testing.
Return a |Channel| that is null. Only useful for testing.
{only available when compiled with the +channel feature}
Return a |Dict| that is null. Only useful for testing.
Return a |Funcref| that is null. Only useful for testing.
Return a |Job| that is null. Only useful for testing.
{only available when compiled with the +job feature}
Return a |List| that is null. Only useful for testing.
Return a |Partial| that is null. Only useful for testing.
Return a |String| that is null. Only useful for testing.
Reset the flag that indicates option {name} was set. Thus it
looks like it still has the default value. Use like this:
set ambiwidth=double
call test_option_not_set('ambiwidth')
Now the 'ambiwidth' option behaves like it was never changed,
even though the value is "double".
Only to be used for testing!
Can also be used as a |method|:
GetOptionName()->test_option_not_set()
Overrides certain parts of Vim's internal processing to be able
to run tests. Only to be used for testing Vim!
The override is enabled when {val} is non-zero and removed
when {val} is zero.
Current supported values for name are:
name effect when {val} is non-zero ~
redraw disable the redrawing() function
redraw_flag ignore the RedrawingDisabled flag
char_avail disable the char_avail() function
starting reset the "starting" variable, see below
nfa_fail makes the NFA regexp engine fail to force a
fallback to the old engine
no_query_mouse do not query the mouse position for "dec"
terminals
no_wait_return set the "no_wait_return" flag. Not restored
with "ALL".
ui_delay time in msec to use in ui_delay(); overrules a
wait time of up to 3 seconds for messages
term_props reset all terminal properties when the version
string is detected
uptime overrules sysinfo.uptime
ALL clear all overrides ({val} is not used)
"starting" is to be used when a test should behave like
startup was done. Since the tests are run by sourcing a
script the "starting" variable is non-zero. This is usually a
good thing (tests run faster), but sometimes changes behavior
in a way that the test doesn't work properly.
When using:
call test_override('starting', 1)
The value of "starting" is saved. It is restored by:
call test_override('starting', 0)
Can also be used as a |method|:
GetOverrideVal()-> test_override('starting')
Return the reference count of {expr}. When {expr} is of a
type that does not have a reference count, returns -1. Only
to be used for testing.
Can also be used as a |method|:
GetVarname()->test_refcount()
Pretend using scrollbar {which} to move it to position
{value}. {which} can be:
left Left scrollbar of the current window
right Right scrollbar of the current window
hor Horizontal scrollbar
For the vertical scrollbars {value} can be 1 to the
line-count of the buffer. For the horizontal scrollbar the
{value} can be between 1 and the maximum line length, assuming
'wrap' is not set.
When {dragging} is non-zero it's like dragging the scrollbar,
otherwise it's like clicking in the scrollbar.
Only works when the {which} scrollbar actually exists,
obviously only when using the GUI.
Can also be used as a |method|:
GetValue()->test_scrollbar('right', 0)
Set the mouse position to be used for the next mouse action.
{row} and {col} are one based.
For example:
call test_setmouse(4, 20)
call feedkeys("<LeftMouse>", "xt")
Set the time Vim uses internally. Currently only used for
timestamps in the history, as they are used in viminfo, and
for undo.
Using a value of 1 makes Vim not sleep after a warning or
error message.
{expr} must evaluate to a number. When the value is zero the
normal behavior is restored.
Can also be used as a |method|:
GetTime()->test_settime()
When [seed] is given this sets the seed value used by
| |
Return the current text in the balloon. Only for the string, not used for the List. | |
Show {expr} inside the balloon. For the GUI {expr} is used as a string. For a terminal {expr} can be a list, which contains the lines of the balloon. If {expr} is not a list it will be split with |balloon_split()|. If {expr} is an empty string any existing balloon is removed. Example: func GetBalloonContent() " ... initiate getting the content return '' endfunc set balloonexpr=GetBalloonContent() func BalloonCallback(result) call balloon_show(a:result) endfunc Can also be used as a |method|: GetText()->balloon_show() The intended use is that fetching the content of the balloon is initiated from 'balloonexpr'. It will invoke an asynchronous method, in which a callback invokes balloon_show(). The 'balloonexpr' itself can return an empty string or a placeholder. When showing a balloon is not possible nothing happens, no error message. {only available when compiled with the |+balloon_eval| or |+balloon_eval_term| feature} | |
Split String {msg} into lines to be displayed in a balloon. The splits are made for the current window size and optimize to show debugger output. Returns a |List| with the split lines. Can also be used as a |method|: GetText()->balloon_split()->balloon_show() {only available when compiled with the |+balloon_eval_term| feature} | |
Return a List containing the number value of each byte in Blob {blob}. Examples: blob2list(0z0102.0304) returns [1, 2, 3, 4] blob2list(0z) returns [] Returns an empty List on error. |list2blob()| does the opposite. Can also be used as a |method|: GetBlob()->blob2list() | |
Obsolete name: buffer_name(). | |
Obsolete name for bufnr("$"): last_buffer_nr(). | |
Return non-zero when there is something to read from {handle}. {handle} can be a Channel or a Job that has a Channel. This is useful to read from a channel at a convenient time, e.g. from a timer. Note that messages are dropped when the channel does not have a callback. Add a close callback to avoid that. Can also be used as a |method|: GetChannel()->ch_canread() | |
Close {handle}. See |channel-close|. {handle} can be a Channel or a Job that has a Channel. A close callback is not invoked. Can also be used as a |method|: GetChannel()->ch_close() | |
Close the "in" part of {handle}. See |channel-close-in|. {handle} can be a Channel or a Job that has a Channel. A close callback is not invoked. Can also be used as a |method|: GetChannel()->ch_close_in() | |
Send {expr} over {handle}. The {expr} is encoded according to the type of channel. The function cannot be used with a raw channel. See |channel-use|. {handle} can be a Channel or a Job that has a Channel. {options} must be a Dictionary. It must not have a "callback" entry. It can have a "timeout" entry to specify the timeout for this specific request. ch_evalexpr() waits for a response and returns the decoded expression. When there is an error or timeout it returns an empty string. Note that while waiting for the response, Vim handles other messages. You need to make sure this doesn't cause trouble. Can also be used as a |method|: GetChannel()->ch_evalexpr(expr) | |
Send {string} over {handle}. {handle} can be a Channel or a Job that has a Channel. Works like |ch_evalexpr()|, but does not encode the request or decode the response. The caller is responsible for the correct contents. Also does not add a newline for a channel in NL mode, the caller must do that. The NL in the response is removed. Note that Vim does not know when the text received on a raw channel is complete, it may only return the first part and you need to use |ch_readraw()| to fetch the rest. See |channel-use|. Can also be used as a |method|: GetChannel()->ch_evalraw(rawstring) | |
Get the buffer number that {handle} is using for String {what}. {handle} can be a Channel or a Job that has a Channel. {what} can be "err" for stderr, "out" for stdout or empty for socket output. Returns -1 when there is no buffer. Can also be used as a |method|: GetChannel()->ch_getbufnr(what) | |
Get the Job associated with {channel}. If there is no job calling |job_status()| on the returned Job will result in "fail". Can also be used as a |method|: GetChannel()->ch_getjob() | |
Returns a Dictionary with information about {handle}. The items are: "id" number of the channel "status" "open", "buffered" or "closed", like ch_status() When opened with ch_open(): "hostname" the hostname of the address "port" the port of the address "sock_status" "open" or "closed" "sock_mode" "NL", "RAW", "JSON" or "JS" "sock_io" "socket" "sock_timeout" timeout in msec When opened with job_start(): "out_status" "open", "buffered" or "closed" "out_mode" "NL", "RAW", "JSON" or "JS" "out_io" "null", "pipe", "file" or "buffer" "out_timeout" timeout in msec "err_status" "open", "buffered" or "closed" "err_mode" "NL", "RAW", "JSON" or "JS" "err_io" "out", "null", "pipe", "file" or "buffer" "err_timeout" timeout in msec "in_status" "open" or "closed" "in_mode" "NL", "RAW", "JSON" or "JS" "in_io" "null", "pipe", "file" or "buffer" "in_timeout" timeout in msec Can also be used as a |method|: GetChannel()->ch_info() | |
Write String {msg} in the channel log file, if it was opened with |ch_logfile()|. When {handle} is passed the channel number is used for the message. {handle} can be a Channel or a Job that has a Channel. The Channel must be open for the channel number to be used. Can also be used as a |method|: 'did something'->ch_log() | |
Start logging channel activity to {fname}. When {fname} is an empty string: stop logging. When {mode} is omitted or "a" append to the file. When {mode} is "w" start with an empty file. Use |ch_log()| to write log messages. The file is flushed after every message, on Unix you can use "tail -f" to see what is going on in real time. To enable the log very early, to see what is received from a terminal during startup, use |--cmd|: vim --cmd "call ch_logfile('logfile', 'w')" This function is not available in the |sandbox|. NOTE: the channel communication is stored in the file, be aware that this may contain confidential and privacy sensitive information, e.g. a password you type in a terminal window. Can also be used as a |method|: 'logfile'->ch_logfile('w') | |
Open a channel to {address}. See |channel|. Returns a Channel. Use |ch_status()| to check for failure. {address} is a String and has the form "hostname:port", e.g., "localhost:8765". When using an IPv6 address, enclose it within square brackets. E.g., "[2001:db8::1]:8765". If {options} is given it must be a |Dictionary|. See |channel-open-options|. Can also be used as a |method|: GetAddress()->ch_open() | |
Read from {handle} and return the received message. {handle} can be a Channel or a Job that has a Channel. For a NL channel this waits for a NL to arrive, except when there is nothing more to read (channel was closed). See |channel-more|. Can also be used as a |method|: GetChannel()->ch_read() | |
Like ch_read() but reads binary data and returns a |Blob|. See |channel-more|. Can also be used as a |method|: GetChannel()->ch_readblob() | |
Like ch_read() but for a JS and JSON channel does not decode the message. For a NL channel it does not block waiting for the NL to arrive, but otherwise works like ch_read(). See |channel-more|. Can also be used as a |method|: GetChannel()->ch_readraw() | |
Send {expr} over {handle}. The {expr} is encoded according to the type of channel. The function cannot be used with a raw channel. See |channel-use|. {handle} can be a Channel or a Job that has a Channel. Can also be used as a |method|: GetChannel()->ch_sendexpr(expr) | |
Send |String| or |Blob| {expr} over {handle}. Works like |ch_sendexpr()|, but does not encode the request or decode the response. The caller is responsible for the correct contents. Also does not add a newline for a channel in NL mode, the caller must do that. The NL in the response is removed. See |channel-use|. Can also be used as a |method|: GetChannel()->ch_sendraw(rawexpr) | |
Set options on {handle}: "callback" the channel callback "timeout" default read timeout in msec "mode" mode for the whole channel See |ch_open()| for more explanation. {handle} can be a Channel or a Job that has a Channel. Note that changing the mode may cause queued messages to be lost. These options cannot be changed: "waittime" only applies to |ch_open()| Can also be used as a |method|: GetChannel()->ch_setoptions(options) | |
Return the status of {handle}: "fail" failed to open the channel "open" channel can be used "buffered" channel can be read, not written to "closed" channel can not be used {handle} can be a Channel or a Job that has a Channel. "buffered" is used when the channel was closed but there is still data that can be obtained with |ch_read()|. If {options} is given it can contain a "part" entry to specify the part of the channel to return the status for: "out" or "err". For example, to get the error status: ch_status(job, {"part": "err"}) Can also be used as a |method|: GetChannel()->ch_status() | |
Return the character class of the first character in {string}. The character class is one of: 0 blank 1 punctuation 2 word character 3 emoji other specific Unicode class The class is used in patterns and word motions. | |
Same as |col()| but returns the character index of the column position given with {expr} instead of the byte position. Example: With the cursor on '์ธ' in line 5 with text "์ฌ๋ณด์ธ์": charcol('.') returns 3 col('.') returns 7 Can also be used as a |method|: GetPos()->col() | |
Return the digraph of {chars}. This should be a string with exactly two characters. If {chars} are not just two characters, or the digraph of {chars} does not exist, an error is given and an empty string is returned. The character will be converted from Unicode to 'encoding' when needed. This does require the conversion to be available, it might fail. Also see |digraph_getlist()|. Examples: " Get a built-in digraph :echo digraph_get('00') " Returns 'โ' " Get a user-defined digraph :call digraph_set('aa', 'ใ') :echo digraph_get('aa') " Returns 'ใ' Can also be used as a |method|: GetChars()->digraph_get() This function works only when compiled with the |+digraphs| feature. If this feature is disabled, this function will display an error message. | |
Return a list of digraphs. If the {listall} argument is given and it is TRUE, return all digraphs, including the default digraphs. Otherwise, return only user-defined digraphs. The characters will be converted from Unicode to 'encoding' when needed. This does require the conservation to be available, it might fail. Also see |digraph_get()|. Examples: " Get user-defined digraphs :echo digraph_getlist() " Get all the digraphs, including default digraphs :echo digraph_getlist(1) Can also be used as a |method|: GetNumber()->digraph_getlist() This function works only when compiled with the |+digraphs| feature. If this feature is disabled, this function will display an error message. | |
Add digraph {chars} to the list. {chars} must be a string with two characters. {digraph} is a string with one utf-8 encoded character. Be careful, composing characters are NOT ignored. This function is similar to |:digraphs| command, but useful to add digraphs start with a white space. The function result is v:true if |digraph| is registered. If this fails an error message is given and v:false is returned. If you want to define multiple digraphs at once, you can use |digraph_setlist()|. Example: call digraph_set(' ', 'ใ') Can be used as a |method|: GetString()->digraph_set('ใ') This function works only when compiled with the |+digraphs| feature. If this feature is disabled, this function will display an error message. | |
Similar to |digraph_set()| but this function can add multiple digraphs at once. {digraphlist} is a list composed of lists, where each list contains two strings with {chars} and {digraph} as in |digraph_set()|. Example: call digraph_setlist([['aa', 'ใ'], ['ii', 'ใ']]) It is similar to the following: for [chars, digraph] in [['aa', 'ใ'], ['ii', 'ใ']] call digraph_set(chars, digraph) endfor Except that the function returns after the first error, following digraphs will not be added. Can be used as a |method|: GetList()->digraph_setlist() This function works only when compiled with the |+digraphs| feature. If this feature is disabled, this function will display an error message. | |
Output {string} as-is, including unprintable characters. This can be used to output a terminal code. For example, to disable modifyOtherKeys: call echoraw(&t_TE) and to enable it again: call echoraw(&t_TI) Use with care, you can mess up the terminal this way. | |
Like | |
Like |extend()| but instead of adding items to {expr1} a new List or Dictionary is created and returned. {expr1} remains unchanged. Items can still be changed by {expr2}, if you don't want that use |deepcopy()| first. | |
Obsolete name: file_readable(). | |
Like |flatten()| but first make a copy of {list}. | |
Get the full command name from a short abbreviated command
name; see |20.2| for details on command abbreviations.
The string argument {name} may start with a | |
Get the position for String {expr}. Same as |getpos()| but the column number in the returned List is a character index instead of a byte index. If |getpos()| returns a very large column number, such as 2147483647, then getcharpos() will return the character index of the last character. Example: With the cursor on '์ธ' in line 5 with text "์ฌ๋ณด์ธ์": getcharpos('.') returns [0, 5, 3, 0] getpos('.') returns [0, 5, 7, 0] Can also be used as a |method|: GetMark()->getcharpos() | |
Same as |getcurpos()| but the column number in the returned List is a character index instead of a byte index. Example: With the cursor on '๋ณด' in line 3 with text "์ฌ๋ณด์ธ์": getcursorcharpos() returns [0, 3, 2, 0, 3] getcurpos() returns [0, 3, 4, 0, 3] Can also be used as a |method|: GetWinid()->getcursorcharpos() | |
The result is a Number, which is |TRUE| when the IME status is active. See 'imstatusfunc'. | |
Translate String {text} if possible. This is mainly for use in the distributed Vim scripts. When generating message translations the {text} is extracted by xgettext, the translator can add the translated message in the .po file and Vim will lookup the translation when gettext() is called. For {text} double quoted strings are preferred, because xgettext does not understand escaping in single quoted strings. | |
Can also be used as a |method|: GetName()->hlexists() | |
Obsolete name: highlightID(). Can also be used as a |method|: GetName()->hlID() | |
Like |input()|, but when the GUI is running and text dialogs are supported, a dialog window pops up to input the text. Example: :let n = inputdialog("value for shiftwidth", shiftwidth()) :if n != "" : let &sw = n :endif When the dialog is cancelled {cancelreturn} is returned. When omitted an empty string is returned. Hitting works like pressing the OK button. Hitting works like pressing the Cancel button. NOTE: Command-line completion is not supported. Can also be used as a |method|: GetPrompt()->inputdialog() | |
Get the channel handle that {job} is using. To check if the job has no channel: if string(job_getchannel(job)) == 'channel fail' Can also be used as a |method|: GetJob()->job_getchannel() | |
Returns a Dictionary with information about {job}: "status" what |job_status()| returns "channel" what |job_getchannel()| returns "cmd" List of command arguments used to start the job "process" process ID "tty_in" terminal input name, empty when none "tty_out" terminal output name, empty when none "exitval" only valid when "status" is "dead" "exit_cb" function to be called on exit "stoponexit" |job-stoponexit| Only in Unix: "termsig" the signal which terminated the process (See |job_stop()| for the values) only valid when "status" is "dead" Only in MS-Windows: "tty_type" Type of virtual console in use. Values are "winpty" or "conpty". See 'termwintype'. Without any arguments, returns a List with all Job objects. Can also be used as a |method|: GetJob()->job_info() | |
Change options for {job}. Supported are: "stoponexit" |job-stoponexit| "exit_cb" |job-exit_cb| Can also be used as a |method|: GetJob()->job_setoptions(options) | |
Start a job and return a Job object. Unlike |system()| and |:!cmd| this does not wait for the job to finish. To start a job in a terminal window see |term_start()|. If the job fails to start then |job_status()| on the returned Job object results in "fail" and none of the callbacks will be invoked. {command} can be a String. This works best on MS-Windows. On Unix it is split up in white-separated parts to be passed to execvp(). Arguments in double quotes can contain white space. {command} can be a List, where the first item is the executable and further items are the arguments. All items are converted to String. This works best on Unix. On MS-Windows, job_start() makes a GUI application hidden. If want to show it, Use |:!start| instead. The command is executed directly, not through a shell, the 'shell' option is not used. To use the shell: let job = job_start(["/bin/sh", "-c", "echo hello"]) Or: let job = job_start('/bin/sh -c "echo hello"') Note that this will start two processes, the shell and the command it executes. If you don't want this use the "exec" shell command. On Unix $PATH is used to search for the executable only when the command does not contain a slash. The job will use the same terminal as Vim. If it reads from stdin the job and Vim will be fighting over input, that doesn't work. Redirect stdin and stdout to avoid problems: let job = job_start(['sh', '-c', "myserver </dev/null >/dev/null"]) The returned Job object can be used to get the status with |job_status()| and stop the job with |job_stop()|. Note that the job object will be deleted if there are no references to it. This closes the stdin and stderr, which may cause the job to fail with an error. To avoid this keep a reference to the job. Thus instead of: call job_start('my-command') use: let myjob = job_start('my-command') and unlet "myjob" once the job is not needed or is past the point where it would fail (e.g. when it prints a message on startup). Keep in mind that variables local to a function will cease to exist if the function returns. Use a script-local variable if needed: let s:myjob = job_start('my-command') {options} must be a Dictionary. It can contain many optional items, see |job-options|. Can also be used as a |method|: BuildCommand()->job_start() | |
Returns a String with the status of {job}: "run" job is running "fail" job failed to start "dead" job died or was stopped after running On Unix a non-existing command results in "dead" instead of "fail", because a fork happens before the failure can be detected. If in Vim9 script a variable is declared with type "job" but never assigned to, passing that variable to job_status() returns "fail". If an exit callback was set with the "exit_cb" option and the job is now detected to be "dead" the callback will be invoked. For more information see |job_info()|. Can also be used as a |method|: GetJob()->job_status() | |
Stop the {job}. This can also be used to signal the job. When {how} is omitted or is "term" the job will be terminated. For Unix SIGTERM is sent. On MS-Windows the job will be terminated forcedly (there is no "gentle" way). This goes to the process group, thus children may also be affected. Effect for Unix: "term" SIGTERM (default) "hup" SIGHUP "quit" SIGQUIT "int" SIGINT "kill" SIGKILL (strongest way to stop) number signal with that number Effect for MS-Windows: "term" terminate process forcedly (default) "hup" CTRL_BREAK "quit" CTRL_BREAK "int" CTRL_C "kill" terminate process forcedly Others CTRL_BREAK On Unix the signal is sent to the process group. This means that when the job is "sh -c command" it affects both the shell and the command. The result is a Number: 1 if the operation could be executed, 0 if "how" is not supported on the system. Note that even when the operation was executed, whether the job was actually stopped needs to be checked with |job_status()|. If the status of the job is "dead", the signal will not be sent. This is to avoid to stop the wrong job (esp. on Unix, where process numbers are recycled). When using "kill" Vim will assume the job will die and close the channel. Can also be used as a |method|: GetJob()->job_stop() | |
This is similar to |json_decode()| with these differences:
| |
This is similar to |json_encode()| with these differences:
| |
Return a Blob concatenating all the number values in {list}. Examples: list2blob([1, 2, 3, 4]) returns 0z01020304 list2blob([]) returns 0z Returns an empty Blob on error. If one of the numbers is negative or more than 255 error is given. |blob2list()| does the opposite. Can also be used as a |method|: GetList()->list2blob() | |
Add a callback function that will be invoked when changes have been made to buffer {buf}. {buf} refers to a buffer name or number. For the accepted values, see |bufname()|. When {buf} is omitted the current buffer is used. Returns a unique ID that can be passed to |listener_remove()|. The {callback} is invoked with five arguments: a:bufnr the buffer that was changed a:start first changed line number a:end first line number below the change a:added number of lines added, negative if lines were deleted a:changes a List of items with details about the changes Example: func Listener(bufnr, start, end, added, changes) echo 'lines ' .. a:start .. ' until ' .. a:end .. ' changed' endfunc call listener_add('Listener', bufnr) The List cannot be changed. Each item in a:changes is a dictionary with these entries: lnum the first line number of the change end the first line below the change added number of lines added; negative if lines were deleted col first column in "lnum" that was affected by the change; one if unknown or the whole line was affected; this is a byte index, first character has a value of one. When lines are inserted the values are: lnum line above which the new line is added end equal to "lnum" added number of lines inserted col 1 When lines are deleted the values are: lnum the first deleted line end the line below the first deleted line, before the deletion was done added negative, number of lines deleted col 1 When lines are changed: lnum the first changed line end the line below the last changed line added 0 col first column with a change or 1 The entries are in the order the changes were made, thus the most recent change is at the end. The line numbers are valid when the callback is invoked, but later changes may make them invalid, thus keeping a copy for later might not work. The {callback} is invoked just before the screen is updated, when |listener_flush()| is called or when a change is being made that changes the line count in a way it causes a line number in the list of changes to become invalid. The {callback} is invoked with the text locked, see |textlock|. If you do need to make changes to the buffer, use a timer to do this later |timer_start()|. The {callback} is not invoked when the buffer is first loaded. Use the |BufReadPost| autocmd event to handle the initial text of a buffer. The {callback} is also not invoked when the buffer is unloaded, use the |BufUnload| autocmd event for that. Can also be used as a |method|, the base is passed as the second argument: GetBuffer()->listener_add(callback) | |
Invoke listener callbacks for buffer {buf}. If there are no pending changes then no callbacks are invoked. {buf} refers to a buffer name or number. For the accepted values, see |bufname()|. When {buf} is omitted the current buffer is used. Can also be used as a |method|: GetBuffer()->listener_flush() | |
Remove a listener previously added with listener_add(). Returns FALSE when {id} could not be found, TRUE when {id} was removed. Can also be used as a |method|: GetListenerId()->listener_remove() | |
Evaluate Lua expression {expr} and return its result converted
to Vim data structures. Second {expr} may hold additional
argument accessible as _A inside first {expr}.
Strings are returned as they are.
Boolean objects are converted to numbers.
Numbers are converted to |Float| values if vim was compiled
with |+float| and to numbers otherwise.
Dictionaries and lists obtained by vim.eval() are returned
as-is.
Other objects are returned as zero without any errors.
See |lua-luaeval| for more details.
Note that in a | |
Like |map()| but instead of replacing items in {expr1} a new List or Dictionary is created and returned. {expr1} remains unchanged. Items can still be changed by {expr2}, if you don't want that use |deepcopy()| first. | |
Restore a mapping from a dictionary returned by |maparg()|.
{mode} and {abbr} should be the same as for the call to
|maparg()|.
{mode} is used to define the mode in which the mapping is set,
not the "mode" entry in {dict}.
Example for saving and restoring a mapping:
let save_map = maparg('K', 'n', 0, 1)
nnoremap K somethingelse
...
call mapset('n', 0, save_map)
Note that if you are going to replace a map in several modes,
e.g. with | |
If {list} is a list of strings, then returns a |List| with all the strings in {list} that fuzzy match {str}. The strings in the returned list are sorted based on the matching score. The optional {dict} argument always supports the following items: matchseq When this item is present and {str} contains multiple words separated by white space, then returns only matches that contain the words in the given sequence. If {list} is a list of dictionaries, then the optional {dict} argument supports the following additional items: key key of the item which is fuzzy matched against {str}. The value of this item should be a string. text_cb |Funcref| that will be called for every item in {list} to get the text for fuzzy matching. This should accept a dictionary item as the argument and return the text for that item to use for fuzzy matching. {str} is treated as a literal string and regular expression matching is NOT supported. The maximum supported {str} length is 256. When {str} has multiple words each separated by white space, then the list of strings that have all the words is returned. If there are no matching strings or there is an error, then an empty list is returned. If length of {str} is greater than 256, then returns an empty list. Refer to |fuzzy-match| for more information about fuzzy matching strings. Example: :echo matchfuzzy(["clay", "crow"], "cay") results in ["clay"]. :echo getbufinfo()->map({_, v -> v.name})->matchfuzzy("ndl") results in a list of buffer names fuzzy matching "ndl". :echo getbufinfo()->matchfuzzy("ndl", {'key' : 'name'}) results in a list of buffer information dicts with buffer names fuzzy matching "ndl". :echo getbufinfo()->matchfuzzy("spl", \ {'text_cb' : {v -> v.name}}) results in a list of buffer information dicts with buffer names fuzzy matching "spl". :echo v:oldfiles->matchfuzzy("test") results in a list of file names fuzzy matching "test". :let l = readfile("buffer.c")->matchfuzzy("str") results in a list of lines in "buffer.c" fuzzy matching "str". :echo ['one two', 'two one']->matchfuzzy('two one') results in ['two one', 'one two']. :echo ['one two', 'two one']->matchfuzzy('two one', \ {'matchseq': 1}) results in ['two one']. | |
Same as |matchfuzzy()|, but returns the list of matched strings, the list of character positions where characters in {str} matches and a list of matching scores. You can use |byteidx()| to convert a character position to a byte position. If {str} matches multiple times in a string, then only the positions for the best match is returned. If there are no matching strings or there is an error, then a list with three empty list items is returned. Example: :echo matchfuzzypos(['testing'], 'tsg') results in [['testing'], [[0, 2, 6]], [99]] :echo matchfuzzypos(['clay', 'lacy'], 'la') results in [['lacy', 'clay'], [[0, 1], [1, 2]], [153, 133]] :echo [{'text': 'hello', 'id' : 10}]->matchfuzzypos('ll', {'key' : 'text'}) results in [[{'id': 10, 'text': 'hello'}], [[2, 3]], [127]] | |
Return information about the specified menu {name} in mode {mode}. The menu name should be specified without the shortcut character ('&'). {mode} can be one of these strings: "n" Normal "v" Visual (including Select) "o" Operator-pending "i" Insert "c" Cmd-line "s" Select "x" Visual "t" Terminal-Job "" Normal, Visual and Operator-pending "!" Insert and Cmd-line When {mode} is omitted, the modes for "" are used. Returns a |Dictionary| containing the following items: accel menu item accelerator text |menu-text| display display name (name without '&') enabled v:true if this menu item is enabled Refer to |:menu-enable| icon name of the icon file (for toolbar) |toolbar-icon| iconidx index of a built-in icon modes modes for which the menu is defined. In addition to the modes mentioned above, these characters will be used: " " Normal, Visual and Operator-pending name menu item name. noremenu v:true if the {rhs} of the menu item is not remappable else v:false. priority menu order priority |menu-priority| rhs right-hand-side of the menu item. The returned string has special characters translated like in the output of the ":menu" command listing. When the {rhs} of a menu item is empty, then "" is returned. script v:true if script-local remapping of {rhs} is allowed else v:false. See |:menu-script|. shortcut shortcut key (character after '&' in the menu name) |menu-shortcut| silent v:true if the menu item is created with argument |:menu-silent| submenus |List| containing the names of all the submenus. Present only if the menu item has submenus. Returns an empty dictionary if the menu item is not found. Examples: :echo menu_info('Edit.Cut') :echo menu_info('File.Save', 'n') Can also be used as a |method|: GetMenuName()->menu_info('v') | |
Evaluate MzScheme expression {expr} and return its result
converted to Vim data structures.
Numbers and strings are returned as they are.
Pairs (including lists and improper lists) and vectors are
returned as Vim |Lists|.
Hash tables are represented as Vim |Dictionary| type with keys
converted to strings.
All other types are converted to string with display function.
Examples:
:mz (define l (list 1 2 3))
:mz (define h (make-hash)) (hash-set! h "list" l)
:echo mzeval("l")
:echo mzeval("h")
Note that in a | |
Attach a text property at position {lnum}, {col}. {col} is counted in bytes, use one for the first column. If {lnum} is invalid an error is given. If {col} is invalid an error is given. {props} is a dictionary with these fields: length length of text in bytes, can only be used for a property that does not continue in another line; can be zero end_lnum line number for the end of text (inclusive) end_col column just after the text; not used when "length" is present; when {col} and "end_col" are equal, and "end_lnum" is omitted or equal to {lnum}, this is a zero-width text property bufnr buffer to add the property to; when omitted the current buffer is used id user defined ID for the property; must be a number; when omitted zero is used type name of the text property type All fields except "type" are optional. It is an error when both "length" and "end_lnum" or "end_col" are given. Either use "length" or "end_col" for a property within one line, or use "end_lnum" and "end_col" for a property that spans more than one line. When neither "length" nor "end_col" are given the property will be zero-width. That means it will move with the text, as a kind of mark. One character will be highlighted, if the type specifies highlighting. The property can end exactly at the last character of the text, or just after it. In the last case, if text is appended to the line, the text property size will increase, also when the property type does not have "end_incl" set. "type" will first be looked up in the buffer the property is added to. When not found, the global property types are used. If not found an error is given. Can also be used as a |method|: GetLnum()->prop_add(col, props) | |
Similar to prop_add(), but attaches a text property at multiple positions in a buffer. {props} is a dictionary with these fields: bufnr buffer to add the property to; when omitted the current buffer is used id user defined ID for the property; must be a number; when omitted zero is used type name of the text property type All fields except "type" are optional. The second argument is a List of Lists where each list specifies the starting and ending position of the text. The first two items {lnum} and {col} specify the starting position of the text where the property will be attached and the last two items {end-lnum} and {end-col} specify the position just after the text. Example: call prop_add_list(#{type: 'MyProp', id: 2}, \ [[1, 4, 1, 7], \ [1, 15, 1, 20], \ [2, 30, 3, 30]] Can also be used as a |method|: GetProp()->prop_add_list([[1, 1, 1, 2], [1, 4, 1, 8]]) | |
Remove all text properties from line {lnum}. When {lnum-end} is given, remove all text properties from line {lnum} to {lnum-end} (inclusive). When {props} contains a "bufnr" item use this buffer, otherwise use the current buffer. Can also be used as a |method|: GetLnum()->prop_clear() | |
Search for a text property as specified with {props}: id property with this ID type property with this type name both "id" and "type" must both match bufnr buffer to search in; when present a start position with "lnum" and "col" must be given; when omitted the current buffer is used lnum start in this line (when omitted start at the cursor) col start at this column (when omitted and "lnum" is given: use column 1, otherwise start at the cursor) skipstart do not look for a match at the start position A property matches when either "id" or "type" matches. {direction} can be "f" for forward and "b" for backward. When omitted forward search is performed. If a match is found then a Dict is returned with the entries as with prop_list(), and additionally an "lnum" entry. If no match is found then an empty Dict is returned. | |
Return a List with all text properties in line {lnum}. When {props} contains a "bufnr" item, use this buffer instead of the current buffer. The properties are ordered by starting column and priority. Each property is a Dict with these entries: col starting column length length in bytes, one more if line break is included id property ID type name of the property type, omitted if the type was deleted type_bufnr buffer number for which this type was defined; 0 if the type is global start when TRUE property starts in this line end when TRUE property ends in this line When "start" is zero the property started in a previous line, the current one is a continuation. When "end" is zero the property continues in the next line. The line break after this line is included. Can also be used as a |method|: GetLnum()->prop_list() | |
Remove a matching text property from line {lnum}. When {lnum-end} is given, remove matching text properties from line {lnum} to {lnum-end} (inclusive). When {lnum} is omitted remove matching text properties from all lines (this requires going over all lines, thus will be a bit slow for a buffer with many lines). {props} is a dictionary with these fields: id remove text properties with this ID type remove text properties with this type name both "id" and "type" must both match bufnr use this buffer instead of the current one all when TRUE remove all matching text properties, not just the first one A property matches when either "id" or "type" matches. If buffer "bufnr" does not exist you get an error message. If buffer "bufnr" is not loaded then nothing happens. Returns the number of properties that were removed. Can also be used as a |method|: GetProps()->prop_remove() | |
Add a text property type {name}. If a property type with this name already exists an error is given. Nothing is returned. {props} is a dictionary with these optional fields: bufnr define the property only for this buffer; this avoids name collisions and automatically clears the property types when the buffer is deleted. highlight name of highlight group to use priority when a character has multiple text properties the one with the highest priority will be used; negative values can be used, the default priority is zero combine when omitted or TRUE combine the highlight with any syntax highlight; when FALSE syntax highlight will not be used start_incl when TRUE inserts at the start position will be included in the text property end_incl when TRUE inserts at the end position will be included in the text property Can also be used as a |method|: GetPropName()->prop_type_add(props) | |
Change properties of an existing text property type. If a property with this name does not exist an error is given. The {props} argument is just like |prop_type_add()|. Can also be used as a |method|: GetPropName()->prop_type_change(props) | |
Remove the text property type {name}. When text properties using the type {name} are still in place, they will not have an effect and can no longer be removed by name. {props} can contain a "bufnr" item. When it is given, delete a property type from this buffer instead of from the global property types. When text property type {name} is not found there is no error. Can also be used as a |method|: GetPropName()->prop_type_delete() | |
Returns the properties of property type {name}. This is a dictionary with the same fields as was given to prop_type_add(). When the property type {name} does not exist, an empty dictionary is returned. {props} can contain a "bufnr" item. When it is given, use this buffer instead of the global property types. Can also be used as a |method|: GetPropName()->prop_type_get() | |
Returns a list with all property type names. {props} can contain a "bufnr" item. When it is given, use this buffer instead of the global property types. | |
f rand | Return a pseudo-random Number generated with an xoshiro128** algorithm using seed {expr}. The returned number is 32 bits, also on 64 bits systems, for consistency. {expr} can be initialized by |srand()| and will be updated by rand(). If {expr} is omitted, an internal seed value is used and updated. Examples: :echo rand() :let seed = srand() :echo rand(seed) :echo rand(seed) % 16 " random number 0 - 15 |
Read file {fname} in binary mode and return a |Blob|. When the file can't be opened an error message is given and the result is an empty |Blob|. Also see |readfile()| and |writefile()|. | |
Extended version of |readdir()|. Return a list of Dictionaries with file and directory information in {directory}. This is useful if you want to get the attributes of file and directory at the same time as getting a list of a directory. This is much faster than calling |readdir()| then calling |getfperm()|, |getfsize()|, |getftime()| and |getftype()| for each file and directory especially on MS-Windows. The list will by default be sorted by name (case sensitive), the sorting can be changed by using the optional {dict} argument, see |readdir()|. The Dictionary for file and directory information has the following items: group Group name of the entry. (Only on Unix) name Name of the entry. perm Permissions of the entry. See |getfperm()|. size Size of the entry. See |getfsize()|. time Timestamp of the entry. See |getftime()|. type Type of the entry. On Unix, almost same as |getftype()| except: Symlink to a dir "linkd" Other symlink "link" On MS-Windows: Normal file "file" Directory "dir" Junction "junction" Symlink to a dir "linkd" Other symlink "link" Other reparse point "reparse" user User name of the entry's owner. (Only on Unix) On Unix, if the entry is a symlink, the Dictionary includes the information of the target (except the "type" item). On MS-Windows, it includes the information of the symlink itself because of performance reasons. When {expr} is omitted all entries are included. When {expr} is given, it is evaluated to check what to do: If {expr} results in -1 then no further entries will be handled. If {expr} results in 0 then this entry will not be added to the list. If {expr} results in 1 then this entry will be added to the list. The entries "." and ".." are always excluded. Each time {expr} is evaluated |v:val| is set to a |Dictionary| of the entry. When {expr} is a function the entry is passed as the argument. For example, to get a list of files ending in ".txt": readdirex(dirname, {e -> e.name =~ '.txt$'}) For example, to get a list of all files in the current directory without sorting the individual entries: readdirex(dirname, '1', #{sort: 'none'}) Can also be used as a |method|: GetDirName()->readdirex() | |
{func} is called for every item in {object}, which can be a |List| or a |Blob|. {func} is called with two arguments: the result so far and current item. After processing all items the result is returned. {initial} is the initial result. When omitted, the first item in {object} is used and {func} is first called for the second item. If {initial} is not given and {object} is empty no result can be computed, an E998 error is given. Examples: echo reduce([1, 3, 5], { acc, val -> acc + val }) echo reduce(['x', 'y'], { acc, val -> acc .. val }, 'a') echo reduce(0z1122, { acc, val -> 2 * acc + val }) Can also be used as a |method|: echo mylist->reduce({ acc, val -> acc + val }, 0) | |
Specify overrides for cell widths of character ranges. This tells Vim how wide characters are, counted in screen cells. This overrides 'ambiwidth'. Example: setcellwidths([[0xad, 0xad, 1], \ [0x2194, 0x2199, 2]]) The {list} argument is a list of lists with each three numbers. These three numbers are [low, high, width]. "low" and "high" can be the same, in which case this refers to one character. Otherwise it is the range of characters from "low" to "high" (inclusive). "width" is either 1 or 2, indicating the character width in screen cells. An error is given if the argument is invalid, also when a range overlaps with another. Only characters with value 0x100 and higher can be used. To clear the overrides pass an empty list: setcellwidths([]); You can use the script $VIMRUNTIME/tools/emoji_list.vim to see the effect for known emoji characters. | |
Same as |setpos()| but uses the specified column number as the character index instead of the byte index in the line. Example: With the text "์ฌ๋ณด์ธ์" in line 8: call setcharpos('.', [0, 8, 4, 0]) positions the cursor on the fourth character '์'. call setpos('.', [0, 8, 4, 0]) positions the cursor on the second character '๋ณด'. Can also be used as a |method|: GetPosition()->setcharpos('.') | |
Same as |cursor()| but uses the specified column number as the character index instead of the byte index in the line. Example: With the text "์ฌ๋ณด์ธ์" in line 4: call setcursorcharpos(4, 3) positions the cursor on the third character '์ธ'. call cursor(4, 3) positions the cursor on the first character '์ฌ'. Can also be used as a |method|: GetCursorPos()->setcursorcharpos() | |
Similar to using a |slice| "expr[start : end]", but "end" is used exclusive. And for a string the indexes are used as character indexes instead of byte indexes, like in |vim9script|. Also, composing characters are not counted. When {end} is omitted the slice continues to the last item. When {end} is -1 the last item is omitted. Can also be used as a |method|: GetList()->slice(offset) | |
Stop playing all sounds. {only available when compiled with the |+sound| feature} | |
Play a sound identified by {name}. Which event names are
supported depends on the system. Often the XDG sound names
are used. On Ubuntu they may be found in
/usr/share/sounds/freedesktop/stereo. Example:
call sound_playevent('bell')
On MS-Windows, {name} can be SystemAsterisk, SystemDefault,
SystemExclamation, SystemExit, SystemHand, SystemQuestion,
SystemStart, SystemWelcome, etc.
When {callback} is specified it is invoked when the sound is
finished. The first argument is the sound ID, the second
argument is the status:
0 sound was played to the end
1 sound was interrupted
2 error occurred after sound started
Example:
func Callback(id, status)
echomsg "sound " .. a:id .. " finished with " .. a:status
endfunc
call sound_playevent('bell', 'Callback')
MS-Windows: {callback} doesn't work for this function.
Returns the sound ID, which can be passed to | |
Like | |
Stop playing sound {id}. {id} must be previously returned by
| |
Initialize seed used by |rand()|:
| |
Return a string which contains characters indicating the current state. Mostly useful in callbacks that want to do work that may not always be safe. Roughly this works like:
| |
The result is a Number, which is the number of characters in String {string}. Composing characters are ignored. |strchars()| can count the number of characters, counting composing characters separately. Also see |strlen()|, |strdisplaywidth()| and |strwidth()|. Can also be used as a |method|: GetText()->strcharlen() | |
Open a new window displaying the difference between the two files. The files must have been created with |term_dumpwrite()|. Returns the buffer number or zero when the diff fails. Also see |terminal-diff|. NOTE: this does not work with double-width characters yet. The top part of the buffer contains the contents of the first file, the bottom part of the buffer contains the contents of the second file. The middle part shows the differences. The parts are separated by a line of equals. If the {options} argument is present, it must be a Dict with these possible members: "term_name" name to use for the buffer name, instead of the first file name. "term_rows" vertical size to use for the terminal, instead of using 'termwinsize', but respecting the minimal size "term_cols" horizontal size to use for the terminal, instead of using 'termwinsize', but respecting the minimal size "vertical" split the window vertically "curwin" use the current window, do not split the window; fails if the current buffer cannot be |abandon|ed "bufnr" do not create a new buffer, use the existing buffer "bufnr". This buffer must have been previously created with term_dumpdiff() or term_dumpload() and visible in a window. "norestore" do not add the terminal window to a session file Each character in the middle part indicates a difference. If there are multiple differences only the first in this list is used: X different character w different width f different foreground color b different background color a different attribute + missing position in first file - missing position in second file > cursor position in first file, not in second < cursor position in second file, not in first Using the "s" key the top and bottom parts are swapped. This makes it easy to spot a difference. Can also be used as a |method|: GetFilename()->term_dumpdiff(otherfile) | |
Open a new window displaying the contents of {filename} The file must have been created with |term_dumpwrite()|. Returns the buffer number or zero when it fails. Also see |terminal-diff|. For {options} see |term_dumpdiff()|. Can also be used as a |method|: GetFilename()->term_dumpload() | |
Dump the contents of the terminal screen of {buf} in the file {filename}. This uses a format that can be used with |term_dumpload()| and |term_dumpdiff()|. If the job in the terminal already finished an error is given: If {filename} already exists an error is given: Also see |terminal-diff|. {options} is a dictionary with these optional entries: "rows" maximum number of rows to dump "columns" maximum number of columns to dump Can also be used as a |method|, the base is used for the file name: GetFilename()->term_dumpwrite(bufnr) | |
Returns 1 if the terminal of {buf} is using the alternate screen. {buf} is used as with |term_getsize()|. Can also be used as a |method|: GetBufnr()->term_getaltscreen() | |
Get the ANSI color palette in use by terminal {buf}. Returns a List of length 16 where each element is a String representing a color in hexadecimal "#rrggbb" format. Also see |term_setansicolors()| and |g:terminal_ansi_colors|. If neither was used returns the default colors. {buf} is used as with |term_getsize()|. If the buffer does not exist or is not a terminal window, an empty list is returned. Can also be used as a |method|: GetBufnr()->term_getansicolors() {only available when compiled with GUI enabled and/or the |+termguicolors| feature} | |
Given {attr}, a value returned by term_scrape() in the "attr" item, return whether {what} is on. {what} can be one of: bold italic underline strike reverse Can also be used as a |method|: GetAttr()->term_getattr() | |
Get the cursor position of terminal {buf}. Returns a list with two numbers and a dictionary: [row, col, dict]. "row" and "col" are one based, the first screen cell is row 1, column 1. This is the cursor position of the terminal itself, not of the Vim window. "dict" can have these members: "visible" one when the cursor is visible, zero when it is hidden. "blink" one when the cursor is blinking, zero when it is not blinking. "shape" 1 for a block cursor, 2 for underline and 3 for a vertical bar. "color" color of the cursor, e.g. "green" {buf} must be the buffer number of a terminal window. If the buffer does not exist or is not a terminal window, an empty list is returned. Can also be used as a |method|: GetBufnr()->term_getcursor() | |
Get the Job associated with terminal window {buf}. {buf} is used as with |term_getsize()|. Returns |v:null| when there is no job. Can also be used as a |method|: GetBufnr()->term_getjob() | |
Get a line of text from the terminal window of {buf}. {buf} is used as with |term_getsize()|. The first line has {row} one. When {row} is "." the cursor line is used. When {row} is invalid an empty string is returned. To get attributes of each character use |term_scrape()|. Can also be used as a |method|: GetBufnr()->term_getline(row) | |
Return the number of lines that scrolled to above the top of terminal {buf}. This is the offset between the row number used for |term_getline()| and |getline()|, so that: term_getline(buf, N) is equal to: getline(N + term_getscrolled(buf)) (if that line exists). {buf} is used as with |term_getsize()|. Can also be used as a |method|: GetBufnr()->term_getscrolled() | |
Get the size of terminal {buf}. Returns a list with two numbers: [rows, cols]. This is the size of the terminal, not the window containing the terminal. {buf} must be the buffer number of a terminal window. Use an empty string for the current buffer. If the buffer does not exist or is not a terminal window, an empty list is returned. Can also be used as a |method|: GetBufnr()->term_getsize() | |
Get the status of terminal {buf}. This returns a String with a comma separated list of these items: running job is running finished job has finished normal in Terminal-Normal mode One of "running" or "finished" is always present. {buf} must be the buffer number of a terminal window. If the buffer does not exist or is not a terminal window, an empty string is returned. Can also be used as a |method|: GetBufnr()->term_getstatus() | |
Get the title of terminal {buf}. This is the title that the job in the terminal has set. {buf} must be the buffer number of a terminal window. If the buffer does not exist or is not a terminal window, an empty string is returned. Can also be used as a |method|: GetBufnr()->term_gettitle() | |
Get the name of the controlling terminal associated with terminal window {buf}. {buf} is used as with |term_getsize()|. When {input} is omitted or 0, return the name for writing (stdout). When {input} is 1 return the name for reading (stdin). On UNIX, both return same name. Can also be used as a |method|: GetBufnr()->term_gettty() | |
Return a list with the buffer numbers of all buffers for terminal windows. | |
Get the contents of {row} of terminal screen of {buf}. For {buf} see |term_getsize()|. The first line has {row} one. When {row} is "." the cursor line is used. When {row} is invalid an empty string is returned. Return a List containing a Dict for each screen cell: "chars" character(s) at the cell "fg" foreground color as #rrggbb "bg" background color as #rrggbb "attr" attributes of the cell, use |term_getattr()| to get the individual flags "width" cell width: 1 or 2 For a double-width cell there is one item, thus the list can be shorter than the width of the terminal. Can also be used as a |method|: GetBufnr()->term_scrape(row) | |
Send keystrokes {keys} to terminal {buf}. {buf} is used as with |term_getsize()|. {keys} are translated as key sequences. For example, "<c-x>" means the character CTRL-X. Can also be used as a |method|: GetBufnr()->term_sendkeys(keys) | |
Set the ANSI color palette used by terminal {buf}. {colors} must be a List of 16 valid color names or hexadecimal color codes, like those accepted by |highlight-guifg|. Also see |term_getansicolors()| and |g:terminal_ansi_colors|. The colors normally are: 0 black 1 dark red 2 dark green 3 brown 4 dark blue 5 dark magenta 6 dark cyan 7 light grey 8 dark grey 9 red 10 green 11 yellow 12 blue 13 magenta 14 cyan 15 white These colors are used in the GUI and in the terminal when 'termguicolors' is set. When not using GUI colors (GUI mode or 'termguicolors'), the terminal window always uses the 16 ANSI colors of the underlying terminal. Can also be used as a |method|: GetBufnr()->term_setansicolors(colors) {only available with GUI enabled and/or the |+termguicolors| feature} | |
Set the function name prefix to be used for the |terminal-api| function in terminal {buf}. For example: :call term_setapi(buf, "Myapi_") :call term_setapi(buf, "") The default is "Tapi_". When {expr} is an empty string then no |terminal-api| function can be used for {buf}. When used as a method the base is used for {buf}: GetBufnr()->term_setapi({expr}) | |
When exiting Vim or trying to close the terminal window in another way, {how} defines whether the job in the terminal can be stopped. When {how} is empty (the default), the job will not be stopped, trying to exit will result in |E947|. Otherwise, {how} specifies what signal to send to the job. See |job_stop()| for the values. After sending the signal Vim will wait for up to a second to check that the job actually stopped. Can also be used as a |method|: GetBufnr()->term_setkill(how) | |
Set the command to write in a session file to restore the job in this terminal. The line written in the session file is: terminal ++curwin ++cols=%d ++rows=%d {command} Make sure to escape the command properly. Use an empty {command} to run 'shell'. Use "NONE" to not restore this window. Can also be used as a |method|: GetBufnr()->term_setrestore(command) | |
Set the size of terminal {buf}. The size of the window containing the terminal will also be adjusted, if possible. If {rows} or {cols} is zero or negative, that dimension is not changed. {buf} must be the buffer number of a terminal window. Use an empty string for the current buffer. If the buffer does not exist or is not a terminal window, an error is given. Can also be used as a |method|: GetBufnr()->term_setsize(rows, cols) | |
Open a terminal window and run {cmd} in it. {cmd} can be a string or a List, like with |job_start()|. The string "NONE" can be used to open a terminal window without starting a job, the pty of the terminal can be used by a command like gdb. Returns the buffer number of the terminal window. If {cmd} cannot be executed the window does open and shows an error message. If opening the window fails zero is returned. {options} are similar to what is used for |job_start()|, see |job-options|. However, not all options can be used. These are supported: all timeout options "stoponexit", "cwd", "env" "callback", "out_cb", "err_cb", "exit_cb", "close_cb" "in_io", "in_top", "in_bot", "in_name", "in_buf" "out_io", "out_name", "out_buf", "out_modifiable", "out_msg" "err_io", "err_name", "err_buf", "err_modifiable", "err_msg" However, at least one of stdin, stdout or stderr must be connected to the terminal. When I/O is connected to the terminal then the callback function for that part is not used. There are extra options: "term_name" name to use for the buffer name, instead of the command name. "term_rows" vertical size to use for the terminal, instead of using 'termwinsize' "term_cols" horizontal size to use for the terminal, instead of using 'termwinsize' "vertical" split the window vertically; note that other window position can be defined with command modifiers, such as |:belowright|. "curwin" use the current window, do not split the window; fails if the current buffer cannot be |abandon|ed "hidden" do not open a window "norestore" do not add the terminal window to a session file "term_kill" what to do when trying to close the terminal window, see |term_setkill()| "term_finish" What to do when the job is finished: "close": close any windows "open": open window if needed Note that "open" can be interruptive. See |term++close| and |term++open|. "term_opencmd" command to use for opening the window when "open" is used for "term_finish"; must have "%d" where the buffer number goes, e.g. "10split|buffer %d"; when not specified "botright sbuf %d" is used "term_highlight" highlight group to use instead of "Terminal" "eof_chars" Text to send after all buffer lines were written to the terminal. When not set CTRL-D is used on MS-Windows. For Python use CTRL-Z or "exit()". For a shell use "exit". A CR is always added. "ansi_colors" A list of 16 color names or hex codes defining the ANSI palette used in GUI color modes. See |g:terminal_ansi_colors|. "tty_type" (MS-Windows only): Specify which pty to use. See 'termwintype' for the values. "term_api" function name prefix for the |terminal-api| function. See |term_setapi()|. Can also be used as a |method|: GetCommand()->term_start() | |
Wait for pending updates of {buf} to be handled. {buf} is used as with |term_getsize()|. {time} is how long to wait for updates to arrive in msec. If not set then 10 msec will be used. Can also be used as a |method|: GetBufnr()->term_wait() | |
Returns a |Dictionary| with properties of the terminal that Vim detected from the response to |t_RV| request. See |v:termresponse| for the response itself. If |v:termresponse| is empty most values here will be 'u' for unknown. cursor_style whether sending |t_RS| works ** cursor_blink_mode whether sending |t_RC| works ** underline_rgb whether |t_8u| works ** mouse mouse type supported ** value 'u' for unknown, 'y' for yes, 'n' for no If the |+termresponse| feature is missing then the result is an empty dictionary. If "cursor_style" is 'y' then |t_RS| will be sent to request the current cursor style. If "cursor_blink_mode" is 'y' then |t_RC| will be sent to request the cursor blink status. "cursor_style" and "cursor_blink_mode" are also set if |t_u7| is not empty, Vim will detect the working of sending |t_RS| and |t_RC| on startup. When "underline_rgb" is not 'y', then |t_8u| will be made empty. This avoids sending it to xterm, which would clear the colors. For "mouse" the value 'u' is unknown Also see:
| |
This is for testing: If the memory allocation with {id} is called, then decrement {countdown}, and when it reaches zero let memory allocation fail {repeat} times. When {repeat} is smaller than one it fails one time. Can also be used as a |method|: GetAllocId()->test_alloc_fail() | |
Set a flag to enable the effect of 'autochdir' before Vim startup has finished. | |
Characters in {string} are queued for processing as if they were typed by the user. This uses a low level input buffer. This function works only when with |+unix| or GUI is running. Can also be used as a |method|: GetText()->test_feedinput() | |
Like garbagecollect(), but executed right away. This must only be called directly to avoid any structure to exist internally, and |v:testing| must have been set before calling any function. | |
Set the flag to call the garbagecollector as if in the main loop. Only to be used in tests. | |
Get the value of an internal variable. These values for {name} are supported: need_fileinfo Can also be used as a |method|: GetName()->test_getvalue() | |
Drop one or more files in {list} in the window at {row}, {col}. This function only works when the GUI is running and the |drag-n-drop| feature is present. The supported values for {mods} are: 0x4 Shift 0x8 Alt 0x10 Ctrl The files are added to the argument list and the first file in {list} is edited in the window. See |drag-n-drop| for more information. | |
Inject a mouse button click event. This function only works when the GUI is running. The supported values for {button} are: 0 right mouse button 1 middle mouse button 2 left mouse button 3 mouse button release 4 scroll wheel down 5 scroll wheel up 6 scroll wheel left 7 scroll wheel right {row} and {col} specify the location of the mouse click. The first row of the Vim window is 1 and the last row is 'lines'. The maximum value of {col} is 'columns'. To inject a multiclick event, set {multiclick} to 1. The supported values for {modifiers} are: 4 shift is pressed 8 alt is pressed 16 ctrl is pressed After injecting the mouse event you probably should call |feedkeys()| to have them processed, e.g.: call feedkeys("y", 'Lx!') | |
Ignore any error containing {expr}. A normal message is given instead. This is only meant to be used in tests, where catching the error with try/catch cannot be used (because it skips over following code). {expr} is used literally, not as a pattern. When the {expr} is the string "RESET" then the list of ignored errors is made empty. Can also be used as a |method|: GetErrorText()->test_ignore_error() | |
Return a |Blob| that is null. Only useful for testing. | |
Return a |Channel| that is null. Only useful for testing. {only available when compiled with the +channel feature} | |
Return a |Dict| that is null. Only useful for testing. | |
Return a |Funcref| that is null. Only useful for testing. | |
Return a |Job| that is null. Only useful for testing. {only available when compiled with the +job feature} | |
Return a |List| that is null. Only useful for testing. | |
Return a |Partial| that is null. Only useful for testing. | |
Return a |String| that is null. Only useful for testing. | |
Reset the flag that indicates option {name} was set. Thus it looks like it still has the default value. Use like this: set ambiwidth=double call test_option_not_set('ambiwidth') Now the 'ambiwidth' option behaves like it was never changed, even though the value is "double". Only to be used for testing! Can also be used as a |method|: GetOptionName()->test_option_not_set() | |
Overrides certain parts of Vim's internal processing to be able to run tests. Only to be used for testing Vim! The override is enabled when {val} is non-zero and removed when {val} is zero. Current supported values for name are: name effect when {val} is non-zero ~ redraw disable the redrawing() function redraw_flag ignore the RedrawingDisabled flag char_avail disable the char_avail() function starting reset the "starting" variable, see below nfa_fail makes the NFA regexp engine fail to force a fallback to the old engine no_query_mouse do not query the mouse position for "dec" terminals no_wait_return set the "no_wait_return" flag. Not restored with "ALL". ui_delay time in msec to use in ui_delay(); overrules a wait time of up to 3 seconds for messages term_props reset all terminal properties when the version string is detected uptime overrules sysinfo.uptime ALL clear all overrides ({val} is not used) "starting" is to be used when a test should behave like startup was done. Since the tests are run by sourcing a script the "starting" variable is non-zero. This is usually a good thing (tests run faster), but sometimes changes behavior in a way that the test doesn't work properly. When using: call test_override('starting', 1) The value of "starting" is saved. It is restored by: call test_override('starting', 0) Can also be used as a |method|: GetOverrideVal()-> test_override('starting') | |
Return the reference count of {expr}. When {expr} is of a type that does not have a reference count, returns -1. Only to be used for testing. Can also be used as a |method|: GetVarname()->test_refcount() | |
Pretend using scrollbar {which} to move it to position {value}. {which} can be: left Left scrollbar of the current window right Right scrollbar of the current window hor Horizontal scrollbar For the vertical scrollbars {value} can be 1 to the line-count of the buffer. For the horizontal scrollbar the {value} can be between 1 and the maximum line length, assuming 'wrap' is not set. When {dragging} is non-zero it's like dragging the scrollbar, otherwise it's like clicking in the scrollbar. Only works when the {which} scrollbar actually exists, obviously only when using the GUI. Can also be used as a |method|: GetValue()->test_scrollbar('right', 0) | |
Set the mouse position to be used for the next mouse action. {row} and {col} are one based. For example: call test_setmouse(4, 20) call feedkeys("<LeftMouse>", "xt") | |
Set the time Vim uses internally. Currently only used for timestamps in the history, as they are used in viminfo, and for undo. Using a value of 1 makes Vim not sleep after a warning or error message. {expr} must evaluate to a number. When the value is zero the normal behavior is restored. Can also be used as a |method|: GetTime()->test_settime() | |
When [seed] is given this sets the seed value used by
| |
Return a value with unknown type. Only useful for testing. | |
Return a value with void type. Only useful for testing. | |
Return a string representation of the type of {expr}. Example: echo typename([1, 2, 3]) list |